Whishlist (0) Contact us

Présentation

The Acromag ACPS3310 is a 3U CompactPCI Serial carrier board designed to accommodate two AcroPack or mini-PCIe mezzanine modules in embedded computing systems. Featuring an integrated PCI Express Gen 2 switch, it connects both modules to the host PCIe bus while providing direct front-panel access to field I/O signals.

Compact and Modular I/O Expansion

With two AcroPack expansion slots, the ACPS3310 supports different I/O functions on a single carrier board, including analog data acquisition, digital-to-analog conversion, digital I/O, serial communication and avionics interfaces.

Module signals are routed to two front-panel 68-pin VHDCI CHAMP connectors, providing external field connectivity without internal wiring between the modules and front-panel connectors.

The ACPS3310 complies with the PICMG CPCI-S.0 R2.0 standard and PCI Express 2.1 specification. Geographical addressing also enables identification of the carrier and its module positions within the host system.

Industrial, Defense and Aerospace Applications

The carrier board addresses data acquisition systems, test benches and embedded equipment requiring multiple I/O functions within a compact footprint. Typical applications include industrial automation, defense, aerospace and transportation systems using CompactPCI Serial technology.

Its operating temperature range extends from −40 to +85°C, with 200 LFM airflow. Isolation capabilities are supported when using suitable isolated AcroPack modules and optional isolated DC/DC power converters.

Technical Support and Integration in France

Within the Acromag product portfolio offered by ECRIN Systems, the ACPS3310 can accommodate a range of compatible modules, including the AP220 analog output module, AP323 analog input module and AP570 MIL-STD-1553 communication module.

As Acromag's representative in France for embedded computing solutions, ECRIN Systems supports system integrators with AcroPack module selection, compatibility assessment and CompactPCI Serial integration requirements.

Specifications

INTERFACES
CompactPCI Serial
CompactPCI Serial (CPCI-S.0) peripheral slot card with P1 connector. PCIe x4. Geographical addressing (GA0-GA3).
PCI Express
PCIe Gen 2 switch expands host PCIe port to two ports, one for each AcroPack site. The host port has one or four PCIe lanes (depending on CPCI-S slot). Each AcroPack site has one lane.
PCIe Gen 2 switch expands host PCIe port to two ports, one for each AcroPack site. The host port has one or four PCIe lanes (depending on CPCI-S slot). Each AcroPack site has one lane.
Two AcroPack or mPCIe (full-length) slots. PCIe x1.
Site B includes USB 2.0 interface.
Front panel interface
Each AcroPack module routes to a 68-pin VHDCI CHAMP connector (stacked).
Rear interface
Both AcroPack modules have a PCIe x1 link (via switch) to the CPCI-S P1 connector.
Isolation:
Host logic and field I/O isolated from each other up to 250V AC/DC continuous (1500V AC for one minute). Optional isolated DC/DC converter is required for use with isolated AcroPack modules. Carrier also provides 100VAC/DC continuous isolation between AcroPack module signals. Isolation between adjacent pins/signals on front I/O cable is 30V.
COMPLIANCE
CompactPCI Serial
Meets or exceeds PICMG® CPCI-S.0 R2.0.
PCI Express
PCI Express Version 2.1 compliant carrier.
EMC
Designed to comply with EMC Directive 2004/108/EC.
Immunity: EN 61000-6-2.
Emissions: EN 61000-6-4, Class A.
ELECTRICAL / MECHANICAL
Power Requirements
+12V supply (±10%): 290mA typical with no AcroPacks installed.
The ACPS3310 has four DC/DC converters to provide the power supply voltages to the AcroPack modules that are not present at the host interface.
The +5V, +3.3V, +1.5V and -12V supplies are sourced from the +12V host power.
Dimensions
Dimensions
3U CompactPCI Serial 4HP.
Size: 100 x 160 mm (3.937 x 6.299 inches).
Weight: 158 g.
ENVIRONMENTAL
Operating / Storage Temperature Range
Operation: -40 to 85°C (200 LFM airflow).
Storage: -55 to 125°C.
Relative Humidity
5 to 95% non-condensing.
Shock, Operating
Designed to comply with IEC 60068-2-27: 30G, 11ms half sine, 50G, 3mS half sine, 18 shocks at 6 orientations for both test levels.
Vibration, Operating
Sinusoidal: Designed to comply with IEC 60068-2-6: 10-500Hz, 5G, 2 Hours/axis.
Random: Designed to comply with IEC 60068-2-64: 10-500Hz, 5G-rms, 2 Hours/axis.
Certifications
CE compliant.
Coating/Sealant
Conformal coating available on request.
MTBF
According to MIL-HDBK-217 FN2, GBGC.
25°C: Contact factory.
40°C: Contact factory.
SOFTWARE SUPPORT
Operating Systems
Drivers available for Linux®, Windows® and VxWorks®.
Integrate Your AcroPack Modules with the ACPS3310 Carrier

Integrate Your AcroPack Modules with the ACPS3310 Carrier

Looking for a 3U CompactPCI Serial carrier board to integrate multiple I/O functions into your embedded system?

ECRIN Systems supports the selection of the ACPS3310 and suitable AcroPack modules for analog acquisition, digital I/O, industrial communications or avionics interfaces.

Our technical team can review module compatibility, isolation requirements, field connectivity and integration constraints.

Contact our specialists to define your configuration and request a tailored technical quotation.

AcroPack Modules for the ACPS3310 Carrier Board

See the range
AP570 – MIL-STD-1553 AcroPack Communication Module

AP570 – MIL-STD-1553 AcroPack Communication Module

The Acromag AP570 is a MIL-STD-1553 AcroPack communication module featuring one dual-redundant A/B channel. Available as AP571 and AP572 versions, it supports bus control, simulation and monitoring functions, IRIG-B synchronization and avionics I/O. Its PCIe interface enables integration into compatible AcroPack carrier boards.
AP323 – 16-bit AcroPack Analog Input, 20/40 Channels

AP323 – 16-bit AcroPack Analog Input, 20/40 Channels

The Acromag AP323 is a 16-bit AcroPack analog input module supporting 20 differential or 40 single-ended channels. Featuring four selectable voltage ranges, a 16K-sample FIFO buffer and a PCIe interface, it provides high-density analog data acquisition for embedded computing systems.
AP220 – 16-Channel 12-bit AcroPack Analog Output Module

AP220 – 16-Channel 12-bit AcroPack Analog Output Module

The Acromag AP220 is a 12-bit digital-to-analog converter (DAC) AcroPack module featuring 16 independent voltage outputs. With six software-selectable ranges per channel, simultaneous output updates and a PCI Express interface, it supports analog signal generation in embedded, industrial and test systems.