Whishlist (0) Contact us

Présentation

The Acromag AP220 AcroPack module is a 12-bit digital-to-analog converter (DAC) board designed for generating and controlling voltage signals in industrial embedded systems, test benches and measurement equipment.

Featuring 16 independent 12-bit analog voltage outputs, the AP220 integrates a dedicated D/A converter for each channel. This design enables multiple analog voltages to be generated from a single module, with individually configurable output ranges.

Six Selectable Voltage Ranges and Simultaneous Output Updates

The AP220 provides six software-selectable voltage ranges for each channel: 0 to 5 V, 0 to 10 V, −2.5 to +7.5 V, ±3 V, ±5 V and ±10 V.

Each converter features double-buffered registers, allowing new values to be loaded before being applied to the outputs. Channels can therefore be updated individually or simultaneously, depending on application requirements.

This capability is particularly useful for coordinated signal generation, analog command simulation and applications requiring multiple voltage outputs.

The module also includes stored calibration coefficients, outputs that reset to 0 V and software-accessible monitoring functions.

AcroPack Form Factor and PCI Express Interface

Measuring 70 × 30 mm, the AP220 features a PCI Express Gen 1 x1 interface and a 100-pin Samtec connector for carrier board integration.

Its mezzanine form factor allows multiple I/O functions to be combined within a single embedded system. Two AP220 modules installed on a compatible carrier board can provide up to 32 analog voltage outputs.

The AP220 can be integrated with the ACPS3310 3U CompactPCI Serial carrier board, which provides two AcroPack expansion sites.

Carrier board selection depends on host system form factor, connectivity and integration requirements.

Industrial, Defense and Test System Applications

The AP220 supports analog signal generation and control requirements in several applications:

  • Voltage and command signal simulation on test benches.

  • Multichannel analog signal generation for instrumentation.

  • Control of equipment with compatible voltage inputs.

  • Analog output expansion in industrial embedded systems.

  • Test and simulation equipment for defense and aerospace applications.

The AP220 operates from −40 to +70°C in its standard configuration. The upper operating temperature can reach +85°C when using the Acromag AP-CC-01 conduction-cooling kit.

For applications also requiring analog signal acquisition, the AP323 AcroPack module provides complementary 16-bit analog input capabilities.

Acromag Integration and Technical Support in France

Within the Acromag embedded computing and I/O portfolio, the AP220 provides compact digital-to-analog conversion for projects requiring multiple voltage outputs.

As Acromag's representative in France for embedded computing solutions, ECRIN Systems supports system integrators in selecting the module, identifying compatible carrier boards and evaluating integration requirements.

Our technical team can also assist with I/O interface selection, voltage range configuration and operating temperature requirements for your embedded application.

Specifications

Performance Specifications
Analog Output
Output configuration
16 non-isolated bipolar/unipolar differential outputs. Each
channel is paired with a signal return reference.
D/A Resolution
12 bits.
Output ranges
Unipolar: 0V to 5V, 0V to 10V.
BiPolar: -2.5V to 7.5V, ±-3V, ±5V, ±10V.
Settling time
9uS - 20V step to 1 LSB at 16-bit resolution.
7.5uS - 10V step to 1 LSB at 16-bit resolution.
Maximum throughput rate
Outputs can be updated simultaneously or individually.
One channel: 7.5μS/conversion.
Sixteen channels simultaneously: 17μS/16 channels.
Calibrated system accuracy
Linearity error: ±0.5 LSB.
Offset error: ±0.0625 LSB.
Gain error: ±0.0625 LSB.
Total error: ±0.625 LSB (±0.0152% FSR) maximum.
Data format (left–justified)
Straight Binary or Two’s Complement.
Output at reset
0 volts.
Output current
10mA (maximum). This corresponds to a minimum load
resistance of 1K ohms with a 10V output.
Short circuit protection
Indefinite at 25°C.
Alarm function
Software readable for brownout, short-circuit and
temperature exceeding 150 °C conditions
PCI Express Base Specification
Conforms to PCIe base specification
Revision 2.1.
Lanes
1 lane in each direction.
Bus Speed
2.5 Gbps (Generation 1).
Memory
4k space required.
1 base address register
Environmental
Operating temperature
-40 to 70°C.
-40 to 85°C.
(requires an AcroPack heatsink conduction-cool kit)
Storage temperature
-55 to 150°C.
Relative humidity
5 to 95% non-condensing.
MTBF
4,094,686 hrs. at 25°C, MIL-HDBK-217F, notice 2.
Power
+3.3 VDC ±5% 400mA Typical, 480mA Maximum.
+12 VDC ±5% 85mA Typical, 275mA Maximum.
-12 VDC ±5% 50mA Typical, 200mA Maximum.
Physical
Length
70mm.
Width
30mm

Resources & documentation

Integrate 16 Analog Outputs with the Acromag AP220

Integrate 16 Analog Outputs with the Acromag AP220

Looking for a 12-bit analog output module for a test bench, industrial equipment or embedded computing application?

ECRIN Systems supports the selection of the Acromag AP220, compatible AcroPack carrier boards and voltage range configurations suited to your requirements.

Our technical team can also review field connectivity, power supply, cooling and host system integration constraints.

Contact our specialists to discuss your configuration and request a tailored technical quotation.

Related AcroPack Modules and Carrier Boards

See the range
ACPS3310 – 3U CompactPCI Serial AcroPack Carrier

ACPS3310 – 3U CompactPCI Serial AcroPack Carrier

The Acromag ACPS3310 is a 3U CompactPCI Serial carrier board featuring two AcroPack or mini-PCIe expansion slots. With PCI Express 2.1 connectivity and front-panel field I/O access, it supports analog data acquisition, digital I/O and communication functions in embedded computing systems.
AP570 – MIL-STD-1553 AcroPack Communication Module

AP570 – MIL-STD-1553 AcroPack Communication Module

The Acromag AP570 is a MIL-STD-1553 AcroPack communication module featuring one dual-redundant A/B channel. Available as AP571 and AP572 versions, it supports bus control, simulation and monitoring functions, IRIG-B synchronization and avionics I/O. Its PCIe interface enables integration into compatible AcroPack carrier boards.
AP323 – 16-bit AcroPack Analog Input, 20/40 Channels

AP323 – 16-bit AcroPack Analog Input, 20/40 Channels

The Acromag AP323 is a 16-bit AcroPack analog input module supporting 20 differential or 40 single-ended channels. Featuring four selectable voltage ranges, a 16K-sample FIFO buffer and a PCIe interface, it provides high-density analog data acquisition for embedded computing systems.