Whishlist (0) Contact us

Présentation

The TQMC800 is a VITA 93.0  Small Form Factor Mezzanine Card (QMC) compatible module providing a one channel Ethernet 10Base-T / 100Base-TX / 1000Base-T interface.

The Intel I210IT Gigabit Ethernet Controller is accessible via PCIe. The Ethernet interface supports 10, 100 and 1000 Mbit/s transmission rates and is equipped with a 16 Mbit Serial Flash to support PXE and iSCSI boot.

The Ethernet interface of the TQMC800 is capable of performing an auto negotiation algorithm which allows both link-partners to determine the best link-parameters. The TQMC800 supports IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping (with software extensions).

The TQMC800-10R routes the Ethernet port to the QMC I/O P12 connector.

The port is galvanically isolated from the Ethernet controller and a LED on the board indicates the network activity.

The TQMC800 has an I²C board temperature sensor to facilitate measurement of the board heat near the Ethernet Controller.

The module meets the requirements to operate in extended temperature range from -40°C to +85°C.

Software support for Intel I210IT is available at www.intel.com.

For operating systems not supported by Intel, please contact TEWS.

Specifications

MECHANICAL INTERFACE
Single QMC conforming to VITA 93.0;
ELECTRICAL INTERFACE
PCI Express x1, Revision 2.1 Gen 1
GIGABIT ETHERNET CONTROLLER
Intel I210IT
NUMBER OF CHANNELS
1
SERIAL FLASHES FOR BOOT ROM
16 Mbit
I/O STANDARDS
10Base-T / 100Base-TX / 1000Base-T
TEMPERATURE RANGE
Operating: -40 °C to +85 °C
Storage: -40 °C to +85 °C
HUMIDITY
5 – 95% non-condensing

Resources & documentation

Looking for information about about the TQMC800

Looking for information about about the TQMC800

Do you have a technical question or would you like a quote? Our team is here to help.
Please feel free to contact us using this form.

Other TEWS cards that may interest you

See the range
TQMC600 – QMC FPGA with Configurable Digital I/O

TQMC600 – QMC FPGA with Configurable Digital I/O

The TQMC600 is a VITA 93.0 QMC module with a user-programmable AMD Artix 7 FPGA. Three I/O configurations are available: 32 5 V-tolerant TTL lines, 16 EIA-422/EIA-485 differential lines or 16 M-LVDS lines, with individually programmable I/O direction.
TQMC700

TQMC700

Reconfigurable FPGA with AD/DA & Digital I/O
TQMC701

TQMC701

8 Single-Ended / Differential A/D Channels, 4 D/A Channels and 16 Digital I/O Channels