- PCI Express Gen2 x4 carrier board
- 2 single-width or 1 double-width QMC module
- Low-profile, half-length PCIe form factor
- Front-panel I/O through VHDCI-68 connector
- IPMC controller and –40 to +85°C operation
The TEWS Technologies TPCE210 is a PCI Express carrier board designed to integrate embedded I/O modules conforming to the VITA 93.0 QMC standard.
It features a low-profile, half-length PCI Express form factor compatible with PCIe Revision 2.0. Two single-width QMC sites support either two independent modules or one double-width module.
The host system's PCI Express Gen2 x4 link is distributed to both QMC sites through an onboard PCI Express switch.
This design enables different I/O functions to be added to computing platforms equipped with a compatible PCI Express expansion slot.
QMC module signals are accessible through a front-panel VHDCI-68 connector.
The routing provides access to all five IOPIPE signal groups from the first QMC site and two IOPIPE groups from the second site.
This distribution must be considered when selecting modules, particularly for applications requiring numerous I/O signals.
Each QMC site also features a 14-pin JTAG header for development and debugging operations supported by the installed module.
The TPCE210 integrates an IPMC management controller providing access to the FRU EEPROM information and sensors of compatible QMC modules.
This feature supports module health monitoring within the host system.
The carrier board is specified for operation from –40 to +85°C, with an 11 mm QMC stacking height.
It can be considered for industrial equipment, test systems and electronic platforms requiring multiple acquisition or communication interfaces.
The TPCE210 supports different modules from the TEWS Technologies embedded I/O portfolio, depending on electrical compatibility and signal-routing requirements.
Potential combinations include the TQMC400 for RS232/RS422/RS485 communication, the TQMC402 for isolated serial interfaces or the TQMC700 for analog and FPGA functions.
ECRIN Systems supports module selection, signal-routing assessments, software driver verification and host platform integration.
This approach complements our COTS and Modified COTS services, particularly for electronic systems requiring several embedded I/O functions within one computer.
Do you need to add serial, analog, digital or FPGA interfaces to a PCI Express computing platform?
The TPCE210 carrier board provides an integration option for two single-width QMC modules within one PCIe expansion slot.
ECRIN Systems can help select compatible modules, assess I/O signal routing and verify integration constraints, including cooling, software interfaces and cabling.
Share your QMC references and host platform specifications to evaluate a configuration suited to your application.