Whishlist (0) Contact us

Présentation

Four Individually Programmable RS232, RS422 and RS485 Channels

The TQMC400 is a single-width embedded I/O module conforming to the VITA 93.0 QMC standard. It integrates four independent UART controllers with multiprotocol transceivers. Each channel can operate in RS232, RS422/RS485 full-duplex or RS485 half-duplex mode.

In RS232 mode, the module supports RxD, TxD, RTS, CTS, DTR, DSR, CD and RI modem signals. RS422/RS485 interfaces include software-selectable 120 Ω termination. Data rates reach 1 Mbps in RS232 mode and 20 Mbps in RS422/RS485 modes. Each channel features 256-byte transmit and receive FIFOs.

Serial Connectivity for Embedded Electronic Equipment

The TQMC400 addresses communication requirements between embedded computers, control equipment, instruments and subsystems using serial interfaces. Its four programmable channels allow different serial communication modes to be implemented within a single module.

Air-cooled and conduction-cooled variants support an operating temperature range from –40 to +85°C, making the module suitable for consideration in industrial and embedded electronic platforms requiring multiple serial connections.

PCI Express and QMC System Integration with ECRIN Systems

The TQMC400 requires a compatible QMC carrier or host platform. The TPCE210 carrier board, for example, supports two single-width QMC modules in a PCI Express system.

The TQMC400 belongs to the TEWS Technologies embedded I/O portfolio available through ECRIN Systems. Our technical team can help assess interface requirements, cabling, software drivers and integration constraints within a COTS or Modified COTS system.

Specifications

MECHANICAL INTERFACE
Single QMC conforming to VITA 93.0
ELECTRICAL INTERFACE
PCI Express x1, Revision 2.0 Gen 1
PCIe TARGET CHIP
XR17V354 (Exar)
INTERFACE TYPE
Asynchronous serial interface
IPMI SUPPORT
FRU EEPROM, as defined in VITA 93.0
NUMBER OF CHANNELS
4
PHYSICAL I/O INTERFACE
Software selectable RS232, RS422, RS485 full duplex, RS485 half duplex
SERIAL CHANNEL I/O SIGNALS
RS232: TxD, RxD, RTS, CTS, DTR, DSR, CD, RI, GND
RS422/RS485 Full Duplex: TxD+/-, RxD+/-, GND
RS485 Half Duplex: Dx+/-, GND
TERMINATION
Software selectable 120ohms
ESD PROTECTION
±16 kV Human Body Model
PROGRAMMABLE BAUD RATES
RS232: up to 1 Mbps
RS422/485: up to 20 Mbps
TEMPERATURE RANGE
Operating: -40 °C to +85 °C
Storage: -40 °C to +85 °C
MTBF
959 000 h
HUMIDITY
5 – 95% non-condensing

Resources & documentation

Integrate Four Configurable Serial Interfaces into Your Embedded System

Integrate Four Configurable Serial Interfaces into Your Embedded System

Does your application require multiple RS232, RS422 or RS485 connections, full modem signals or different serial operating modes?

ECRIN Systems can help you select the TQMC400 configuration, cooling variant and QMC carrier board suitable for your platform. Our team can assess data rates, electrical characteristics, cabling and integration requirements.

Share your technical specifications or interface requirements to discuss a suitable embedded serial communication solution.

Related QMC Communication Modules

See the range
TQMC802 – 4-Channel Isolated CAN FD QMC Module, 5 Mbps

TQMC802 – 4-Channel Isolated CAN FD QMC Module, 5 Mbps

The TQMC802 is a VITA 93.0 QMC module with four independent, galvanically isolated CAN FD interfaces. It supports CAN FD and Classical CAN, with data rates up to 5 Mbps and configurable termination on each channel.
TQMC402 – 4-Channel Isolated RS232/RS422/RS485 QMC Module

TQMC402 – 4-Channel Isolated RS232/RS422/RS485 QMC Module

The TQMC402 is a VITA 93.0 QMC module featuring four galvanically isolated RS232, RS422 or RS485 serial interfaces. Each channel is independently programmable and supports asynchronous communication up to 20 Mbps in RS422/RS485 modes.
TQMC401 – 4-Channel High-Speed Synchronous/Asynchronous Serial QMC Module

TQMC401 – 4-Channel High-Speed Synchronous/Asynchronous Serial QMC Module

The TQMC401 is a VITA 93.0 QMC module featuring four high-speed synchronous and asynchronous serial channels. Its FPGA-based controller supports multiple protocols, DMA transfers and synchronous data rates up to 10 Mbps.