Whishlist (0) Contact us

Présentation

 

The Acromag VPX7600 is a 3U OpenVPX single-board computer designed for applications requiring high computing performance, high-speed Ethernet communications and I/O expansion. It features an 11th-generation Intel Xeon W processor (Tiger Lake-H), with 8 cores and 16 threads, supported by 32 GB soldered DDR4-3200 ECC memory.

Developed in alignment with the SOSA (Sensor Open Systems Architecture) Technical Standard, the VPX7600 supports modular embedded computing platforms, particularly in defense, aerospace and data-intensive applications.

Onboard storage is provided by a 64 GB NVMe M.2 BGA SSD in the standard configuration, with capacities up to 1 TB offered by the manufacturer.

100GbE and 10GbE Networking for OpenVPX Systems

The VPX7600 features an Intel E810 Ethernet controller providing high-speed communications through the VPX backplane.

The board includes three main network interfaces:

  • One 100GbE (100GBASE-KR4) port on the Data Plane through P1, supporting IEEE 1588 Precision Time Protocol.

  • One 10GbE (10GBASE-KR) port on the Control Plane through P1.

  • One 1/2.5GbE Ethernet port through P2, with TSN functionality supported by the integrated MAC controller.

These interfaces support the separation of high-bandwidth data traffic, control communications and additional networking requirements within an OpenVPX platform.

For further background on time-sensitive communications, explore our guide to TSN and its differences from AFDX.

PCIe Gen4 XMC Expansion and Embedded Interfaces

The VPX7600 provides an XMC expansion site with an eight-lane PCI Express Gen4 connection, enabling the addition of processing or I/O functions through compatible mezzanine modules.

Rear XMC I/O is routed through the P16 connector according to VITA 46.9. Different XMC connector configurations are available depending on build options.

The board also includes DisplayPort 1.4 with up to 4K resolution at 60 Hz, USB 3.2 Gen 2, USB 2.0, SATA III, RS-232 or RS-422, and four discrete GPIO signals.

System management is provided through an IPMC compatible with VITA 46.11 and IPMI 1.5. UEFI boot firmware is stored in dual SPI Flash devices.

Air-Cooled and Conduction-Cooled Versions

The VPX7600 is available in two versions:

  • VPX7600-42-20: air-cooled version with front-panel I/O, operating from −40 to +55°C.

  • VPX7600-42-50: conduction-cooled version, operating from −40 to +85°C.

The versions have different environmental characteristics, including shock and vibration requirements defined by the applicable VITA 47 classes.

Product selection depends on operating temperatures, available cooling, VPX backplane compatibility and mechanical integration requirements.

Acromag Embedded Computing Solutions in France – ECRIN Systems

Within the Acromag processor board and embedded I/O portfolio, the VPX7600 provides 3U VPX computing capabilities combining Intel Xeon processing, 100GbE networking and XMC expansion.

Based in Crolles, near Grenoble, ECRIN Systems supports system integrators with VPX board selection and integration for industrial, aerospace and defense applications.

Our expertise also covers rugged high-performance computing and 3U VPX platforms, together with COTS and Modified COTS services for projects requiring specific hardware integration.

Board, XMC module and interface selection must be validated against the OpenVPX slot profile, cooling requirements and application constraints.

Specifications

Performance Specifications
Processor & Memory
CPU
Intel Xeon W-11000E Series Processor.
(11th generation, codename Tiger Lake H).
W-11865MRE: 4.70 GHz, 8 cores, 16 threads, 24 MB
cache, 45W.
Chipset
Intel RM590E PCH chipset.
Memory
32GB of dual channel soldered DDR4-3200 ECC memory.
Flash Storage
NVME 64GB SSD M.2 BGA with x4 PCIe Gen3 interface
Software and Firmware Support
Drivers
Support provided for Microsoft® Windows®10,
VxWorks™ 7 SR0540, and Linux™ (RHEL, CentOS, Fedora,
Ubuntu) kernel 4.0 and later.
BIOS
Dual BIOS SPI Flash EEPROMs
UEFI boot firmware
BIOS Features TBD
Switched Fabric Interconnects
VPX Data Plane
1x 100 Gigabit Ethernet port on P1.
100GBASE-KR4 protocol.
Supports IEEE-1588 Precision Time Protocol.
VPX Expansion Plane
x4 PCIe Gen3 on P1.
VPX Control Plane
1x 10 Gigabit Ethernet port on P1.
10GBASE-KR protocol.
1x 100/1000/2500BASE-T Ethernet port on P2.
Supports Time-Sensitive Networking (TSN) via TGL PCH
integrated MAC.
XMC Site
Host Interface
8-lanes of PCIe Gen4 to P15 connector per VITA 42.3.
Support for PCIe Gen1 (2.5GT/s), Gen2 (5GT/s), Gen3
(8GT/s), and Gen4 (16GT/s).
Rear I/O
Backplane P16 rear I/O mapping X12d+X16s+X8d per VITA
46.9.
Supports both 5V and 12V VPWR, configurable via
firmware.
XMC TDP: 15W (contact the factory for higher powered
mezzanine requirements.
Build Options available to support VITA 42, VITA 61, or
VITA 88 XMC connector types.
Peripheral I/O
1x DisplayPort 1.4 interface
Supports HBR3 data rate and 4K 60Hz max. resolution.
1x USB 3.2 Gen 2x1 port (10Gb/s).
1x USB 2.0 port.
1x SATA III port.
2x RS-232 or 1x RS-422 full duplex port(s).
1x RS-232 Maintenance Port (LVCMOS).
4x Discrete GPIO.
Bus Compliance
SOSA 3U I/O Intensive Slot Profile
SLT3-PAY-1F1F2U1TU1T1U1T-14.2.16.
VITA 65 OpenVPX Module Profile
MOD3-PAY-1F1F2U1TU1T1U1T-16.2.15-2
AMPS String
MODA3-16.2.15-1-F2C-(E18)(P3F)(1E7-E3)
(S3-D1-U2-U1-M3-G1)<XA0>
System Management
Crossfield Technology HOST 3.0 / VITA 46.11 / IPMI 1.5
Compliant IPMC.
Form Factor
3U VPX 1” pitch (VITA 48.0).
Power
+12V (VS1) and +3.3V_AUX only, per VITA 65.0.
Power Consumption Estimates: TBD.
XMC site supports up to 25W DC power but only
thermally qualified to 15W.
Environmental
Operating Temperature
-40 to 55°C. VITA 47 Class AC2.
Operating Temperature Conduction-cooled
-40 to 85°C. VITA 47 Class CC4.
Storage Temperature
-55 to 105°C. VITA 47 Class C4.
Humidity
Air-cooled: Withstands exposure up to 95% relative
humidity, per VITA 47.2.
Conduction-cooled: Withstands exposure up to 100%
relative humidity, per VITA 47.3.
Vibration
Air-cooled: VITA 47 Class V1.
Withstands vibration as defined below for 1 hr. per axis.
5 Hz to 100 Hz PSD = 0.04g2/Hz
Conduction-cooled: VITA 47 Class V3.
Withstands vibration as defined below for 1 hr. per axis.
5 Hz to 100 Hz PSD increasing at 3 dB/octave.
100 Hz to 1000 Hz PSD = 0.10 g2/Hz.
1000 Hz to 2000 Hz PSD decreasing at 3 dB/octave.
Shock
Air-cooled: VITA 47 Class OS1.
Withstands operating shock as defined below.
20g, 11ms half-sine or terminal sawtooth shock pulses in
all 3 axes.
Conduction-cooled: VITA 47 Class OS2.
Withstands operating shock as defined below.
40g, 11ms half-sine or terminal sawtooth shock pulses in
all 3 axes.
Altitude
Operates from 1,500 feet (460 meters) below sea
level to 60,000 feet (18,300 meters) above sea level,
per VITA 47.1.

Resources & documentation

Integrate the VPX7600 Processor Board into Your Embedded System

Integrate the VPX7600 Processor Board into Your Embedded System

Looking for a 3U OpenVPX processor board for a defense embedded system, a data processing platform or an application requiring 100GbE networking?

ECRIN Systems supports the selection of the Acromag VPX7600, including air-cooled or conduction-cooled versions and backplane interface compatibility assessment.

Our technical team can also review XMC expansion, thermal management, power requirements and OpenVPX or SOSA slot profile compatibility.

Contact our specialists to discuss your configuration and request a tailored technical quotation.

Other 3U VPX Processor Boards for Embedded Systems

See the range
EIR – 3U VPX Intel Core Ultra 7 Processor Board with AI NPU

EIR – 3U VPX Intel Core Ultra 7 Processor Board with AI NPU

EIR is a 3U VPX processor board from Concurrent Technologies featuring a 16-core Intel® Core™ Ultra Series 3 processor, integrated Xe3 graphics and NPU 5.0. It combines 64GB LPDDR5 memory, Ethernet interfaces and PCIe/XMC expansion capabilities for embedded computing and AI applications.
Hermes II – Rugged SOSA-Aligned 3U VPX 100GbE Processor Board

Hermes II – Rugged SOSA-Aligned 3U VPX 100GbE Processor Board

Hermes II is a rugged SOSA-aligned 3U VPX processor board powered by a 16-core Intel® Core™ Ultra Series 3 processor. It features 64GB LPDDR5 IBECC memory, a configurable Ethernet Data Plane up to 100GbE, XMC expansion and hardware security capabilities for mission-critical embedded systems.
KRATOS – Intel Xeon 6 Rugged 3U VPX Compute-Intensive Board

KRATOS – Intel Xeon 6 Rugged 3U VPX Compute-Intensive Board

KRATOS is a rugged 3U VPX processor board developed by Concurrent Technologies for compute-intensive embedded applications. SOSA-aligned, it combines Intel® Xeon® 6 processing, DDR5 ECC memory and high-speed Ethernet and PCIe connectivity, with different configurations to meet system requirements.