Whishlist (0) Contact us

Présentation

The Acromag AP323 AcroPack module is a high-density analog input board designed for voltage measurement and signal digitization in industrial embedded systems, test equipment, defense and aerospace applications.

Featuring a 16-bit analog-to-digital converter (ADC), the AP323 supports 20 differential or 40 single-ended analog input channels. These acquisition modes can be selected according to application requirements but cannot be used simultaneously.

Multichannel Data Acquisition and Selectable Voltage Ranges

The AP323 provides four DIP-switch-selectable input ranges: ±5 V, ±10 V, 0 to +5 V and 0 to +10 V. The selected range applies to all channels.

The module includes a 16K-sample FIFO buffer and several programmable scanning modes. Channel acquisition order can be configured through software, while analog-to-digital conversions can be initiated by software commands or an external hardware trigger.

Integrated precision voltage references also support software calibration and conversion error correction.

Compact AcroPack Form Factor and PCI Express Interface

Measuring 70 × 30 mm, the AP323 features a PCI Express Gen 1 x1 interface and a 100-pin Samtec field I/O connector. A compatible AcroPack carrier board is required for host system integration.

The module can be considered for integration with the ACPS3310 3U CompactPCI Serial carrier board, subject to configuration and field connection requirements.

Operating temperatures range from −40 to +70°C with adequate airflow, extending to +85°C when using the AP-CC-01 conduction-cooling kit under the specified airflow conditions.

Industrial Applications, Signal Acquisition and Test Systems

The AP323 addresses multichannel voltage measurement, analog signal acquisition, signal monitoring and embedded instrumentation requirements.

It can be integrated into industrial equipment, test benches and measurement systems for defense and aerospace applications, subject to application-specific requirements.

For configurations also requiring analog output functions, the Acromag AP220 module provides complementary digital-to-analog conversion capabilities.

Acromag Technical Support in France – ECRIN Systems

Within the Acromag embedded computing and I/O portfolio, the AP323 provides high-density analog data acquisition in a compact AcroPack format.

Based in Crolles, near Grenoble, ECRIN Systems represents Acromag embedded computing solutions in France, supporting system integrators with module selection, compatible carrier boards and interface integration requirements.

Specifications

Performance Specifications
Analog Input
20 differential or 40 single-ended.
A/D Resolution
16 bits.
Input range (dip switch-selectable)
Bipolar ±5V or ±10V
Unipolar 0 to +5V or 0 to +10V
Data sample memory
16K sample FIFO buffer.
Maximum throughput rate
200KHz (5µS/conversion).
A/D triggers
External, and software.
System accuracy
2.4 LSB (0.014%)
Maximum overall calibrated error at 25°C
Data format
Binary two’s compliment and straight binary.
Input overvoltage protection
Power on: -20V to +40V.
Power off: -35V to +55V
Common mode rejection ratio (60Hz)
96dB typical.
Channel-to-channel rejection ratio (60Hz)
96dB typical
PCI Express Base Specification
Conforms to PCIe base specification
Revision 2.1.
Lanes
1 lane in each direction.
Bus Speed
2.5 Gbps (Generation 1).
Memory
4k space required.
1 base address register.
Environmental
Operating temperature
-40 to 70°C.
-40 to 85°C.
(requires an AcroPack heatsink conduction-cool kit)
Storage temperature
-40 to 85°C.
Relative humidity
5 to 95% non-condensing.
Power
3.3 VDC ±5% 400mA typical, 500mA maximum.
5.0 VDC ±5% 20mA typical, 30mA maximum.
±12 VDC ±5% 0.7mA typical, 1.4mA maximum.
Physical
Length
70mm.
Width
30mm.

Resources & documentation

Looking for information about ACROMAG AP300 series?

Looking for information about ACROMAG AP300 series?

Looking for a 16-bit analog input module for an embedded computer, test bench or industrial application?

ECRIN Systems supports the selection of the Acromag AP323, compatible AcroPack carrier boards and the appropriate configuration for your channel count, voltage ranges and operating conditions.

Our technical team can also review field connectivity, cooling and host system integration requirements.

Contact our specialists to discuss your configuration and request a tailored technical quotation.

Related Analog Acquisition and AcroPack Solutions

See the range
ACPS3310 – 3U CompactPCI Serial AcroPack Carrier

ACPS3310 – 3U CompactPCI Serial AcroPack Carrier

The Acromag ACPS3310 is a 3U CompactPCI Serial carrier board featuring two AcroPack or mini-PCIe expansion slots. With PCI Express 2.1 connectivity and front-panel field I/O access, it supports analog data acquisition, digital I/O and communication functions in embedded computing systems.
AP220 – 16-Channel 12-bit AcroPack Analog Output Module

AP220 – 16-Channel 12-bit AcroPack Analog Output Module

The Acromag AP220 is a 12-bit digital-to-analog converter (DAC) AcroPack module featuring 16 independent voltage outputs. With six software-selectable ranges per channel, simultaneous output updates and a PCI Express interface, it supports analog signal generation in embedded, industrial and test systems.
QMC350 – 20-Channel 16-bit Analog Input / 1 MSPS

QMC350 – 20-Channel 16-bit Analog Input / 1 MSPS

The QMC350 is a VITA 93 analog-input module providing 20 simultaneous channels, each with a dedicated 16-bit 1 MSPS ADC. Per-channel voltage-range selection, digital filtering, software calibration and a PCIe Gen2 x4 interface support compact high-density data-acquisition systems.