Whishlist (0) Contact us

Présentation

Four Galvanically Isolated RS232, RS422 and RS485 Interfaces

The TEWS Technologies TQMC402 is a single-width VITA 93.0 QMC serial communication module designed for electronic systems requiring multiple independent asynchronous interfaces.

It integrates four individually programmable UART channels supporting RS232, RS422 or RS485 communication, with full-duplex and half-duplex modes depending on the selected interface.

Each channel is galvanically isolated from the host system and the other channels using digital isolators and integrated DC/DC converters. This electrical separation supports the connection of multiple devices with different interface potentials.

Up to 20 Mbps and Configurable Serial Connections

The TQMC402 supports data rates up to 1 Mbps in RS232 mode and 20 Mbps in RS422/RS485 modes. Each channel includes 256-byte transmit and receive FIFOs to support data exchange.

Software-selectable 120 Ω termination and programmable slew-rate control allow the electrical characteristics of the serial connection to be adapted to cabling requirements.

The I/O lines also provide ±16 kV ESD protection according to the Human Body Model. The module communicates with the host through PCI Express Revision 2.0 x1.

Isolated Serial Interfaces for Industrial and Embedded Equipment

The TQMC402 addresses communication requirements between embedded computers, instruments, control equipment and electronic devices using serial connections.

Its four configurable channels combine multiple communication modes within a single module while maintaining electrical isolation between interfaces.

Available in air-cooled and conduction-cooled variants, the TQMC402 supports an operating temperature range of –40 to +85°C. The appropriate configuration depends on the host platform's electrical, mechanical and thermal requirements.

Integrate the TQMC402 with ECRIN Systems

The TQMC402 can be used with a compatible QMC carrier board, including the TPCE210 PCI Express carrier or the TCPS210 CompactPCI Serial carrier.

ECRIN Systems supports the selection of TEWS Technologies embedded I/O boards and modules, considering communication requirements, interface electrical characteristics and system integration constraints.

The module can therefore be evaluated as part of a COTS or Modified COTS system requiring multiple isolated serial interfaces.

Specifications

Mechanical Interface
Single-width QMC conforming to VITA 93.0
Electrical Interface
PCIe Revision 2.0 x1
PCIe Target Chip
XR17V354 (Exar)
Interface Type
Asynchronous serial interface
IPMI Support
FRU EEPROM, as defined in VITA 93.0
Number of Channels
4
Physical I/O Interface
RS232
RS422
RS485 full- / half-duplex
(Software selectable)
Channel Isolation
Galvanic isolation to system
Isolated against each other
Serial Channel I/O Signals
RS232: TxD, RxD, GND
RS422 / RS485 full-duplex: TxD+/-, RxD+/-, GND
RS485 half-duplex: Dx+/-, GND
Termination
Software selectable 120 Ω
Programmable Baud Rates
RS232: up to 1 Mbps
RS422 / RS485: up to 20 Mbps
Slew-Rate Control
Software selectable
ESD Protection
±16 kV Human Body Model
Temperature Range
Operating: -40 °C to +85 °C
Storage: -40 °C to +85 °C
MTBF
Contact factory
Humidity
5% – 95% non-condensing

Resources & documentation

Integrate Four Isolated Serial Interfaces into Your Embedded Platform

Integrate Four Isolated Serial Interfaces into Your Embedded Platform

Does your application require multiple RS232, RS422 or RS485 connections, galvanic isolation between devices and high communication data rates?

ECRIN Systems can help select the TQMC402 and evaluate its compatibility with your computing platform. Our technical team can assess isolation requirements, electrical levels, transmission modes, cabling and system integration constraints.

Share your interface specifications and project requirements to evaluate a suitable QMC configuration.

Related QMC Embedded Communication Modules

See the range
TQMC802 – 4-Channel Isolated CAN FD QMC Module, 5 Mbps

TQMC802 – 4-Channel Isolated CAN FD QMC Module, 5 Mbps

The TQMC802 is a VITA 93.0 QMC module with four independent, galvanically isolated CAN FD interfaces. It supports CAN FD and Classical CAN, with data rates up to 5 Mbps and configurable termination on each channel.
TQMC401 – 4-Channel High-Speed Synchronous/Asynchronous Serial QMC Module

TQMC401 – 4-Channel High-Speed Synchronous/Asynchronous Serial QMC Module

The TQMC401 is a VITA 93.0 QMC module featuring four high-speed synchronous and asynchronous serial channels. Its FPGA-based controller supports multiple protocols, DMA transfers and synchronous data rates up to 10 Mbps.
TQMC400 – 4-Channel QMC RS232/RS422/RS485 Full-Modem Serial Module

TQMC400 – 4-Channel QMC RS232/RS422/RS485 Full-Modem Serial Module

The TEWS Technologies TQMC400 is a VITA 93.0 QMC module featuring four programmable RS232, RS422 or RS485 serial channels. It supports asynchronous communication up to 20 Mbps in RS422/RS485 modes and provides full RS232 modem signals.