- 4 synchronous/asynchronous RS422/RS485 channels
- Up to 10 Mbps synchronous and 2 Mbps asynchronous
- HDLC, isochronous and asynchronous protocols
- DMA transfers and 512 × 32-bit FIFO per channel
- FPGA controller, PCIe 2.1 and –40 to +85°C operation
The TEWS Technologies TQMC401 is a VITA 93.0 QMC embedded I/O module designed for applications requiring high-speed synchronous or asynchronous serial communication.
It integrates four full-duplex RS422/RS485 channels controlled by FPGA-based logic. Its PCI Express Revision 2.1 interface provides host connectivity, while DMA transfers support data exchange with host memory and reduce CPU intervention.
Each channel features dedicated 512 × 32-bit transmit and receive FIFOs. Data rates reach 10 Mbps in synchronous mode and 2 Mbps in asynchronous mode.
The TQMC401 supports asynchronous communication with oversampling, isochronous operation, synchronous transmission and HDLC.
Available synchronous signal encodings include NRZ, NRZI, FM0, FM1 and Manchester. Multiple clock sources allow different transmission rates to be configured according to the application.
Each channel provides individually configurable interrupt sources and onboard 120 Ω termination for the differential RS422/RS485 lines.
The TQMC401 addresses electronic platforms requiring multiple serial communication channels, synchronous protocols or DMA-based data transfer.
Its single-width QMC form factor and air-cooled or conduction-cooled variants provide integration options for industrial and embedded computing systems. The specified operating temperature range is –40 to +85°C.
Electrical, software and mechanical compatibility must be verified for each host platform.
The TQMC401 can be evaluated with compatible QMC carrier boards, including the TPCE210 PCI Express carrier and the TCPS210 CompactPCI Serial carrier.
ECRIN Systems supports the selection of TEWS Technologies embedded I/O and serial communication modules, taking into account communication protocols, data rates, signal routing, software drivers and integration requirements.
This approach complements our COTS and Modified COTS services, with technical assessment based on each project's specifications.
Does your application require multiple RS422/RS485 channels, synchronous communication, HDLC support or DMA transfers?
ECRIN Systems can assist with the evaluation of the TQMC401, its carrier board and system integration requirements. Our technical team can review data rates, electrical constraints, transmission modes, software requirements and the characteristics of your embedded platform.
Share your project specifications to assess the appropriate configuration and confirm the product's development status with TEWS Technologies.