Related News & Guide
Toutes nos actualités
The ADLINK nanoX-EL is a COM Express Mini Type 10 processor module based on the Intel Elkhart Lake platform.
It supports Intel Atom x6000E processors, including the x6425E, x6413E and x6211E, with 2-core and 4-core configurations depending on the selected model. Processing capabilities, frequency and power consumption vary with the CPU.
The module integrates soldered LPDDR4 memory operating at up to 4267 MT/s, with a maximum capacity of 16GB depending on configuration. In-Band ECC support depends on the selected processor.
Its compact 84 × 55mm form factor, compliant with PICMG COM.0 Rev. 3.0 Type 10, supports integration into OEM equipment with a suitable carrier board.
The nanoX-EL combines x86 processing with interfaces designed for industrial embedded equipment.
Supported capabilities include:
Up to four PCI Express Gen3 lanes, configurable as x1, x2 or x4.
2.5GbE Ethernet with TSN functionality supported under Linux, depending on configuration.
Two USB 3.2 interfaces, with Gen2 performance depending on the carrier board design.
Six USB 2.0 interfaces and two SATA 6Gb/s interfaces.
UART, GPIO and I²C interfaces.
An Arm Cortex-M7 controller provides real-time I/O management capabilities, particularly for UART and GPIO functions.
Processors equipped with Intel Gen11 LP graphics support DisplayPort/HDMI and LVDS or eDP display interfaces. Graphics capabilities depend on the selected CPU, as certain versions do not integrate a GPU.
The nanoX-EL offers a standard operating temperature range of 0°C to +60°C, with selected Extreme Rugged configurations supporting -40°C to +85°C.
It addresses industrial controllers, OEM equipment and embedded systems requiring compact x86 computing, communication interfaces and real-time I/O.
Configuration selection must consider processor capabilities, memory, carrier board design, available interfaces and operating conditions.
Explore the ADLINK embedded computing range at ECRIN Systems.
Based in Crolles, France, ECRIN Systems supports OEMs and system integrators with component selection, interface requirements and embedded computing integration.
Our production and integration services, together with our COTS and Modified COTS approach, help address project-specific embedded computing requirements.
Looking for a COM Express Mini Type 10 module for an industrial controller, OEM device or compact embedded system?
ECRIN Systems can assist with nanoX-EL processor and memory selection, carrier board requirements, Ethernet and PCIe connectivity, USB interfaces and real-time functions.
Share your integration requirements with our technical team to discuss the suitable configuration and request a tailored proposal.