Whishlist (0) Contact us

Présentation

XVME-6800: Acromag 6U VME Intel Xeon W Single Board Computer

The Acromag XVME-6800 is a 6U VMEbus single-board computer (SBC) designed for embedded systems requiring updated processing capabilities while maintaining compatibility with existing VME equipment.

It features an 11th-generation Intel Xeon W-11865MRE processor with 8 cores and 16 threads, 32 GB DDR4 ECC memory and onboard NVMe SSD storage. Its 6U VME form factor addresses processor upgrade and lifecycle-extension requirements in industrial, defense, aerospace and transportation systems.

VME64x Interface with FPGA-Based PCI Express Bridge

The XVME-6800 provides VME64x-compatible P1 and P2 connectors. An FPGA-based VME-to-PCIe bridge connects the Intel processor platform to the existing VMEbus.

Supported transfer modes include A16, A24 and A32 addressing, together with MBLT64, 2eVME and 2eSST protocols.

The board can therefore be considered when upgrading an existing VME processor without replacing the entire system. Retaining the installed backplane, I/O modules and application software remains subject to hardware and software compatibility assessment.

Dual PMC/XMC Expansion and Embedded Connectivity

The XVME-6800 features two PMC/XMC expansion sites, supporting additional communication, acquisition or processing functions through compatible mezzanine modules. XMC interfaces provide PCI Express Gen4 x8 connectivity.

The board also includes front-panel Ethernet connections and optional rear Ethernet connectivity depending on the selected configuration, together with USB, DisplayPort, SATA, RS-232/422/485 serial interfaces and six GPIO signals.

An optional P0 rear connector is available on specific ordering configurations. Selecting the correct P0 option is essential when preserving existing rear I/O connections.

Standard and Extended Operating Temperature Versions

The XVME-6800 is an air-cooled processor board offered in two operating temperature configurations:

  • Standard version: 0 to +70°C.

  • Extended-temperature version: −40 to +75°C.

These limits require 300 LFM airflow and depend on application-level thermal conditions.

Published environmental specifications include VITA 47 OS1 shock and VITA 47 V1 vibration requirements. Optional HumiSeal 1B31 conformal coating is also available.

Acromag and ECRIN Systems: Supporting VME System Upgrades in France

Within the Acromag embedded processor and I/O portfolio, the XVME-6800 provides Intel Xeon processing and PMC/XMC expansion for 6U VME computing platforms.

Based in Crolles, near Grenoble, ECRIN Systems supports French industrial customers and system integrators with processor board selection and embedded system integration requirements.

For installed VME platforms, our obsolescence management expertise helps assess replacement options, interface compatibility and continued system operation.

Projects requiring specific hardware adaptations can also benefit from our COTS and Modified COTS services.

Specifications

GENERAL
Standard
VITA 93, single-width QMC
Air-cooled version
QMC521-1111
Conduction-cooled version
QMC522-1111
COMMUNICATION
Number of ports
4 independent asynchronous ports
Interfaces
RS-232, RS-422 or RS-485, programmable per port
Galvanic isolation
Each port isolated from host and other ports
Host-to-field I/O isolation
250 Vrms under the stated UL61010C-1 criterion
RS-485 operation
Full- or half-duplex
Maximum data rate
20 Mbps
FIFO buffers
256-byte transmit and receive FIFOs per port
Serial configuration
5–8 data bits, programmable parity and stop bits
HOST INTERFACE
Bus
PCI Express Gen 1 x1
Specification
PCIe 2.1
Connectors
2 × 80-pin QMC connectors
MECHANICAL
Dimensions
78,25 × 26 × 11 mm
Carrier board
Compatible VITA 93 QMC carrier required
ENVIRONMENTAL
QMC521 – Air-cooled
to +70°C, with 200 LFM airflow
QMC522 – Conduction-cooled
−40 to +85°C
Storage temperature
−55 to +125°C
SOFTWARE
Software
USW-API
Documented operating systems
Windows, Linux, VxWorks

Resources & documentation

Upgrade Your 6U VME System with the XVME-6800

Upgrade Your 6U VME System with the XVME-6800

Looking for a 6U VME processor board to replace an older SBC, increase processing capabilities or extend the service life of an existing embedded system?

ECRIN Systems supports the selection of the Acromag XVME-6800, including standard or extended-temperature configurations and compatibility assessment with your VME backplane.

Our technical team can also review power, cooling, P0 connectivity, PMC/XMC expansion and software compatibility requirements.

Contact our specialists to discuss your configuration and request a technical quotation tailored to your project.

Other VME and Embedded Processor Boards

See the range
VPX7600 – 3U VPX Intel Xeon W 100GbE SBC

VPX7600 – 3U VPX Intel Xeon W 100GbE SBC

The Acromag VPX7600 is a SOSA-aligned 3U OpenVPX single-board computer powered by an 11th-generation Intel Xeon W processor, 32 GB DDR4 ECC memory and 100GbE/10GbE backplane networking. Featuring PCIe Gen4 XMC expansion and air- or conduction-cooled versions, it supports high-performance embedded computing for industrial and defense applications.
cPCI-A3535 – ADLINK 3U CompactPCI Serial Intel Xeon W CPU Board

cPCI-A3535 – ADLINK 3U CompactPCI Serial Intel Xeon W CPU Board

The ADLINK cPCI-A3535 Series is a family of 3U CompactPCI Serial processor blades powered by Intel Xeon W processors. It combines 6-core x86 computing, up to 64GB DDR4 memory, onboard NAND storage and PCIe, Ethernet and SATA interfaces for industrial and railway embedded systems.
Caelus – 6U VME Intel Core Ultra 16-Core Processor Board

Caelus – 6U VME Intel Core Ultra 16-Core Processor Board

Caelus is a 6U VME processor board from Concurrent Technologies featuring a 16-core Intel® Core™ Ultra Series 3 processor and 64GB LPDDR5 memory. It combines VME64x connectivity, XMC expansion, NVMe storage and industrial I/O for embedded VME systems and equipment upgrade programmes.