Whishlist (0) Contact us

Présentation

Gigabit Ethernet 1000BASE-T Interface in VITA 93.0 QMC Format

The TEWS Technologies TQMC800 is a single-width Ethernet communication module conforming to the VITA 93.0 QMC standard.

It provides one Ethernet channel supporting 10BASE-T, 100BASE-TX and 1000BASE-T, managed by an Intel I210IT controller connected to the host through PCI Express Revision 2.1 Gen1 x1.

The interface supports automatic link negotiation, allowing connected devices to select compatible Ethernet transmission parameters.

The Ethernet port is galvanically isolated from the controller, with signals routed to the QMC P12 I/O connector. An onboard LED indicates network activity.

IEEE 1588/802.1AS Synchronization and AVB Capabilities

The TQMC800 supports IEEE 1588 and IEEE 802.1AS time synchronization functions used in Ethernet systems requiring a common time reference.

The controller also supports IEEE 802.1Qav Audio Video Bridging (AVB) traffic-shaping capabilities with appropriate software extensions.

These features can be relevant to embedded equipment requiring synchronized Ethernet communication or traffic-management functions.

The TQMC800 is a Gigabit Ethernet network interface and should not be considered a complete TSN Ethernet switch.

Network Boot and Embedded Equipment Integration

The module includes 16 Mbit serial Flash memory supporting PXE and iSCSI network boot functions.

An I²C temperature sensor is also provided to monitor the board temperature near the Ethernet controller.

The TQMC800 is specified for operation from –40 to +85°C and is offered in air-cooled and conduction-cooled variants.

These characteristics make it suitable for evaluation in industrial computers and embedded electronic systems requiring an additional Gigabit Ethernet interface.

Integrating the TQMC800 with ECRIN Systems

The TQMC800 can be connected to a compatible QMC carrier board, including the TPCE210 PCI Express carrier or the TCPS210 CompactPCI Serial carrier.

ECRIN Systems supports the selection of TEWS Technologies Ethernet interfaces and embedded I/O modules, considering network requirements, host compatibility, software drivers and integration constraints.

For projects requiring rugged network switching equipment, ECRIN Systems also offers the QUARTZ rugged Ethernet switch family, which provides a different function from a QMC Ethernet network interface.

Specifications

SPECIFICATIONS TQMC800
Mechanical Interface
Single QMC conforming to VITA 93.0
Electrical Interface
PCI Express x1, Revision 2.1 Gen 1
Gigabit Ethernet Controller
Intel I210IT
Number of Channels
1
Serial Flashes for Boot ROM
16 Mbit
I/O Standards
10Base-T / 100Base-TX / 1000Base-T
Temperature Range
Operating: -40°C to +85°C
Storage: -40°C to +85°C
Humidity
5 – 95% non-condensing

Resources & documentation

Add Gigabit Ethernet Connectivity to Your Embedded Platform

Add Gigabit Ethernet Connectivity to Your Embedded Platform

Does your embedded system require a 1000BASE-T Ethernet interface in QMC format, with PTP synchronization or network boot capabilities?

ECRIN Systems can help evaluate the TQMC800 and its integration into your computing platform. Our team can assess carrier board compatibility, software requirements, Ethernet characteristics and thermal constraints.

Share your system configuration and network requirements to assess the module and confirm its development status with TEWS Technologies.

Related QMC Communication and Embedded Connectivity Modules

See the range
TQMC802 – 4-Channel Isolated CAN FD QMC Module, 5 Mbps

TQMC802 – 4-Channel Isolated CAN FD QMC Module, 5 Mbps

The TQMC802 is a VITA 93.0 QMC module with four independent, galvanically isolated CAN FD interfaces. It supports CAN FD and Classical CAN, with data rates up to 5 Mbps and configurable termination on each channel.
TQMC801 – 1000BASE-KX Gigabit Ethernet QMC Module with PTP

TQMC801 – 1000BASE-KX Gigabit Ethernet QMC Module with PTP

The TQMC801 is a VITA 93.0 QMC Gigabit Ethernet 1000BASE-KX module. It features an Intel I210IS controller, IEEE 1588/802.1AS PTP synchronization and AVB traffic-shaping capabilities with appropriate software support.
TQMC400 – 4-Channel QMC RS232/RS422/RS485 Full-Modem Serial Module

TQMC400 – 4-Channel QMC RS232/RS422/RS485 Full-Modem Serial Module

The TEWS Technologies TQMC400 is a VITA 93.0 QMC module featuring four programmable RS232, RS422 or RS485 serial channels. It supports asynchronous communication up to 20 Mbps in RS422/RS485 modes and provides full RS232 modem signals.