Whishlist (0) Contact us

Présentation

QMC Carrier Board for VITA 90 VNX+ Embedded Systems

The TEWS Technologies TVNX210 is a 19 mm VNX+ plug-in module designed to integrate VITA 93.0 QMC embedded I/O interfaces.

It is designed according to ANSI/VITA 90.0-2026 and the Dual QMC Carrier slot profile defined by VITA 90.1.

The TVNX210 provides two independent single-width QMC sites. It supports either two QMC modules or one double-width module, allowing different acquisition and communication functions to be combined within a compact VNX+ system.

This form factor addresses projects requiring multiple embedded electronic interfaces while taking account of platform space constraints.

PCI Express Gen3 Interface and Full QMC Rear I/O Routing

The TVNX210 uses a non-blocking PCI Express Gen3 switch to distribute PCIe connections from the VNX+ backplane to both QMC sites.

The QMC modules are connected through PCI Express Gen3 x4 links. The switch distributes connections from the x8 PCIe expansion plane or the x4 PCIe data-plane links, depending on the host system configuration.

I/O signals from both QMC sites are accessible through the 400-contact HSDC-400 rear connector, in accordance with the VITA 90.1 Dual QMC Carrier slot profile.

This routing provides access to module interfaces through the VNX+ backplane, subject to compatibility with the system and associated I/O transition equipment.

Module Management and Operating Requirements

The TVNX210 integrates a management controller conforming to VITA 46.11.

It supports QMC module health monitoring and communication with the VNX+ system management functions.

The carrier is specified for operation from –40 to +85°C.

The TVNX210 does not provide dedicated galvanic isolation between QMC I/O and the host system. Any isolation requirements must therefore be addressed by the selected QMC module or the complete system.

Integrating QMC Interfaces into a VNX+ Platform with ECRIN Systems

The TVNX210 can be considered for compact embedded systems requiring communication interfaces, data acquisition or FPGA processing functions.

Depending on the required functionality, it can host modules from the TEWS Technologies embedded I/O portfolio, including serial, digital, analog and FPGA modules, subject to compatibility.

ECRIN Systems supports the assessment of mechanical constraints, PCI Express connections, signal routing and QMC module integration into the appropriate system.

For further information about the VNX+ form factor, its interconnection principles and VITA 90 specifications, read our article: VNX+ Officially Ratified by ANSI and VITA.

The integration of these components can form part of ECRIN Systems' COTS and Modified COTS approach, with a technical assessment tailored to project requirements.

Specifications

SPECIFICATIONS TVNX210
Mechanical Interface
VNX+ Plug-In Module (ANSI/VITA 90.0-2026)
VITA 90.1 Slot Profile
VNX.PL-1-02.400-7.2.1.3 <Dual QMC Carrier>
Electrical Interface
PCIe Revision 3.1 Gen3 x4
Number of QMC Sites
2x single-width
Supported QMCs
2x single-width
1x double-width
QMC Interface
PCIe Gen3 x4
QMC I/O Isolation
No
QMC I/O Connection
Complete I/O of all QMC sites on VNX+ HSDC-400 connector
I/O Connectors
VNX+ HSDC-400 connector (Rear I/O)
Temperature Range
Operating: -40 °C to +85 °C
Storage: -40 °C to +85 °C
Humidity
5% – 95% non-condensing
MTBF
Contact factory

Resources & documentation

Integrate QMC Interfaces into Your VNX+ Embedded System

Integrate QMC Interfaces into Your VNX+ Embedded System

Are you developing a compact VNX+ platform requiring multiple embedded I/O functions?

The TVNX210 provides an integration option for two single-width QMC modules or one double-width module, with PCIe Gen3 connections and rear I/O access through the backplane.

ECRIN Systems can assist with module selection, interface compatibility, space constraints and integration into your computing system.

Share your VNX+ platform specifications and I/O requirements to assess TVNX210 compatibility and confirm its development status with TEWS.

Related QMC Carrier Boards and Integration Solutions

See the range
TQMC600 – Artix 7 FPGA QMC Module with Configurable Digital I/O

TQMC600 – Artix 7 FPGA QMC Module with Configurable Digital I/O

The TQMC600 is a VITA 93.0 QMC reconfigurable FPGA module featuring an AMD Artix 7 device. It supports application-specific digital I/O functions through 5 V-tolerant TTL, EIA-422/EIA-485 or M-LVDS interfaces, depending on the variant.
TCPS210 – 3U CompactPCI Serial Carrier with 3 QMC Sites

TCPS210 – 3U CompactPCI Serial Carrier with 3 QMC Sites

The TCPS210 is a 3U CompactPCI Serial QMC carrier conforming to PICMG CPCI-S.0 R3.0. It supports up to three single-width VITA 93.0 QMC modules, with PCIe Gen3 x4 connectivity and rear I/O through P2, P3 and P4 connectors.
TPCE210 – PCI Express Gen2 x4 Dual QMC Carrier Board

TPCE210 – PCI Express Gen2 x4 Dual QMC Carrier Board

The TEWS Technologies TPCE210 is a low-profile PCI Express Gen2 x4 carrier board. It supports two single-width VITA 93.0 QMC modules or one double-width module, with front-panel I/O access through a VHDCI-68 connector.