Whishlist (0) Contact us

Présentation

3U CompactPCI Serial Carrier Board for VITA 93.0 QMC Modules

The TEWS Technologies TCPS210 is a 3U CompactPCI Serial carrier board conforming to PICMG CPCI-S.0 R3.0.

It enables VITA 93.0 QMC embedded I/O modules to be integrated into a CompactPCI Serial computing platform.

The carrier provides three single-width QMC sites. It can accommodate three independent modules, one double-width module combined with a single-width module, or one triple-width module.

This flexibility allows different communication, acquisition and FPGA functions to be combined within a single CompactPCI Serial system.

PCI Express Gen3 x4 Connectivity and Rear I/O Routing

The TCPS210 uses a PCI Express Revision 3.1 Gen3 x4 interface to communicate with the host system.

The x4 PCIe link from the CompactPCI Serial CPU board is distributed to the three QMC sites through a non-blocking PCI Express switch, providing x4 connections to the modules.

QMC module I/O signals are routed to the CompactPCI Serial rear connectors P2, P3 and P4.

This configuration allows module interfaces to be accessed through the backplane and associated rear I/O equipment.

Module Monitoring and Conduction-Cooled Integration

The TCPS210 integrates an IPMC controller supporting QMC module health monitoring and communication with compatible system management functions.

It is specified for operation from –40 to +85°C.

TEWS also provides for integration into conduction-cooled systems, subject to evaluation of the configuration and its thermal requirements.

These characteristics are relevant to embedded platforms requiring multiple I/O functions within a compact CompactPCI Serial form factor.

QMC Module Selection with ECRIN Systems

The TCPS210 supports different modules from the TEWS Technologies embedded I/O portfolio, depending on the required interfaces and host platform constraints.

Potential combinations include the TQMC400 or TQMC402 for serial communication, the TQMC700 for analog and FPGA functions, or the TQMC601 for isolated digital input acquisition.

ECRIN Systems supports QMC module selection, CompactPCI Serial compatibility assessments, I/O routing and mechanical or thermal integration requirements.

These activities can form part of our COTS and Modified COTS approach for equipment requiring multiple embedded electronic interfaces.

Specifications

SPECIFICATIONS TCPS210
Mechanical Interface
CompactPCI-Serial 3U Board conforming to PICMG CPCI-S.0 R3.0
Electrical Interface
PCIe Revision 3.1 Gen3 x4
Number of QMC Sites
3 single-width
Supported QMCs
3x single-width
1x double-width, 1x single-width
1x triple-width
QMC Interface
PCIe Gen3 x4
QMC I/O Isolation
Yes
QMC I/O Connection
Complete I/O of all QMC sites on CPCI-S.0 Rear I/O
I/O Connectors
P2, P3 and P4 (Rear I/O)
Temperature Range
Operating: -40 °C to +85 °C
Storage: -40 °C to +85 °C
Humidity
5% – 95% non-condensing
MTBF
321 000 h

Resources & documentation

Integrate Up to Three QMC Modules into Your CompactPCI Serial System

Integrate Up to Three QMC Modules into Your CompactPCI Serial System

Does your project require multiple embedded I/O interfaces within a 3U CompactPCI Serial platform?

The TCPS210 supports up to three single-width QMC modules in one carrier, with PCIe Gen3 x4 connectivity and rear I/O routing.

ECRIN Systems can help select the modules, evaluate electrical interfaces, define connections and verify integration constraints, including those associated with conduction-cooled systems.

Share your CompactPCI Serial configuration and I/O requirements to discuss the available integration options.

Related QMC Carriers and I/O Expansion Modules

See the range
TQMC402 – 4-Channel Isolated RS232/RS422/RS485 QMC Module

TQMC402 – 4-Channel Isolated RS232/RS422/RS485 QMC Module

The TQMC402 is a VITA 93.0 QMC module featuring four galvanically isolated RS232, RS422 or RS485 serial interfaces. Each channel is independently programmable and supports asynchronous communication up to 20 Mbps in RS422/RS485 modes.
TPCE210 – PCI Express Gen2 x4 Dual QMC Carrier Board

TPCE210 – PCI Express Gen2 x4 Dual QMC Carrier Board

The TEWS Technologies TPCE210 is a low-profile PCI Express Gen2 x4 carrier board. It supports two single-width VITA 93.0 QMC modules or one double-width module, with front-panel I/O access through a VHDCI-68 connector.
TVNX210 – 19 mm VNX+ Dual QMC Carrier Module

TVNX210 – 19 mm VNX+ Dual QMC Carrier Module

The TEWS Technologies TVNX210 is a 19 mm VNX+ carrier conforming to ANSI/VITA 90.0-2026. It supports two single-width QMC modules or one double-width module, with PCIe Gen3 x4 and rear I/O routing to the VNX+ backplane.