Filter
VC300xX – 12G-SDI XMC Video Capture
The Condor VC300xX is an XMC UHD video capture card supporting up to eight 12G, 3G or HD-SDI inputs depending on system bandwidth. It transfers raw video over PCIe Gen3 with capture-to-display latency below 50 ms for real-time embedded video applications.
Condor AGX-ORIN64-HPC – 3U VPX AI SBC
The Condor AGX-ORIN64-HPC is a rugged 3U VPX SBC based on NVIDIA Jetson AGX Orin Industrial. It combines a 12-core Arm CPU, Ampere GPU, 64 GB LPDDR5, ConnectX-7 networking up to 100GbE and GPUDirect RDMA for embedded AI and high-throughput data processing.
TQMC600 – QMC FPGA with Configurable Digital I/O
The TQMC600 is a VITA 93.0 QMC module with a user-programmable AMD Artix 7 FPGA. Three I/O configurations are available: 32 5 V-tolerant TTL lines, 16 EIA-422/EIA-485 differential lines or 16 M-LVDS lines, with individually programmable I/O direction.
V6068 - 3U VPX Versal® Premium ASoC FPGA Optical I/O Module
The V6068 is a next generation heterogeneous embedded computing 3U VPX module featuring the ARM Versal® Premium Adaptive System-on-Chip (ASoC), rugged optical and electrical high-speed I/O, FMC+ site, and SOSA® aligned profile options.
TQMC605 – QMC FPGA with 40 Direct I/Os
The TQMC605 is a VITA 93.0 QMC module featuring a user-programmable AMD Artix 7 FPGA. Its 40 I/O lines connect directly to FPGA pins to preserve Artix 7 SelectIO™ flexibility, with external ESD protection on every line.
TQMC601 – 32 Isolated Digital Inputs
The TQMC601 is a VITA 93.0 QMC module with 32 isolated digital inputs for 15 to 60 V DC signals. It combines galvanic isolation, configurable interrupts and programmable debouncing for fast digital-state acquisition in embedded systems.
TQMC602 – 16 Isolated Digital Inputs / Outputs
The TQMC602 is a VITA 93.0 QMC module combining 16 isolated digital inputs and 16 isolated digital outputs. It supports 15–60 V inputs and 5–36 V outputs up to 0.3 A per channel, with programmable interrupts, debouncing and a hardware watchdog
TQMC603 – 20 Isolated Digital Outputs
The TQMC603 is a VITA 93.0 QMC module with 20 isolated 5–36 V digital outputs. Each channel delivers up to 0.3 A and can operate as high-side, low-side or push-pull, with electrical protection, individual fault monitoring and a hardware watchdog.
TQMC604 – 32 Isolated 5–36 V Digital Outputs
The TQMC604 is a VITA 93.0 QMC module with 32 isolated digital outputs. Each output operates from 5 to 36 V DC at up to 0.15 A, with high-side or low-side switching per group of eight, electrical protection and a hardware watchdog.
TQMC801 – 1000BASE-KX Ethernet QMC
The TQMC801 is a VITA 93.0 QMC module integrating one 1000BASE-KX Ethernet channel and an Intel I210IS controller. It supports IEEE 1588/802.1AS PTP synchronization, IEEE 802.1Qav AVB traffic shaping and PXE/iSCSI network boot.
TQMC802 – 4 Isolated CAN FD Channels
The TQMC802 is a VITA 93.0 QMC module integrating four independent isolated CAN FD interfaces. Each channel supports CAN FD and Classic CAN at data rates up to 5 Mbps, with message filtering, configurable termination and fault-protected isolated transceivers.
AMC705 – 16-Core Processor AMC with 100GbE
The AMC705 is an AdvancedMC processor module based on the NXP Layerscape LX2160A. It combines 16 Arm Cortex-A72 cores, 16 GB DDR4 ECC, QSFP28 connectivity up to 100GbE and configurable rear Ethernet, SRIO and PCIe interfaces for high-bandwidth MicroTCA systems.
AMC720 – Xeon E3 Processor AMC with PCIe
The AMC720 is an Intel Xeon E3 AdvancedMC processor module with up to four cores, 16 GB DDR3 ECC, PCIe, dual Gigabit Ethernet, SATA and IPMI 2.0. The AMC720C variant supports conduction-cooled MicroTCA systems.
AMC352 – Quad HDMI/DVI Video Decoder
AdvancedMC multichannel video-decoder module with four HDMI/DVI outputs, H.264, VC-1, MPEG and additional codec support up to Full HD 1920 × 1080 at 60 FPS, with PCIe or Gigabit Ethernet data transport.