Filter
TPCE210 – PCI Express Gen2 x4 Dual QMC Carrier Board
The TEWS Technologies TPCE210 is a low-profile PCI Express Gen2 x4 carrier board. It supports two single-width VITA 93.0 QMC modules or one double-width module, with front-panel I/O access through a VHDCI-68 connector.
TVNX210 – 19 mm VNX+ Dual QMC Carrier Module
The TEWS Technologies TVNX210 is a 19 mm VNX+ carrier conforming to ANSI/VITA 90.0-2026. It supports two single-width QMC modules or one double-width module, with PCIe Gen3 x4 and rear I/O routing to the VNX+ backplane.
VME218 – 6U VME 24-Port Layer 2 Ethernet Switch
The VadaTech VME218 is a managed Layer 2 Gigabit Ethernet switch in 6U VME form factor. It provides 12 front-panel 10/100/1000BASE-T RJ-45 ports and can be expanded to 24 ports using additional SFP or RJ-45 interfaces. VLAN, QoS, Spanning Tree, ACL and port-mirroring capabilities support switching and monitoring in embedded VME platforms.
FMC272 – Quad 12 GSPS RF DAC / Dual 6 GSPS ADC
The VadaTech FMC272 is a high-speed RF conversion FMC mezzanine based on the Analog Devices AD9082. It combines four 16-bit RF DACs up to 12 GSPS, two 12-bit RF ADCs up to 6 GSPS and 8 GHz analog bandwidth. JESD204B/JESD204C links transfer data to a compatible FPGA carrier board.
AMC720 – Intel Xeon E3 PCIe Processor AMC
The AMC720 is an Intel Xeon E3 AdvancedMC processor module with up to four cores, 16 GB DDR3 ECC, PCIe, dual Gigabit Ethernet, SATA and IPMI 2.0. The AMC720C variant supports conduction-cooled MicroTCA systems.
AMC535 – Arria 10 SoC AMC/FMC FPGA Carrier
The VadaTech AMC535 is an AdvancedMC FPGA carrier with FMC expansion, based on the Arria 10 SoC SX660. It combines programmable FPGA logic, a dual-core Arm Cortex-A9 processor, 16 GB of FPGA DDR4 memory and a VITA 57 FMC site for signal acquisition and processing interfaces in MicroTCA systems.
AMC352 – Quad HDMI/DVI Video Decoder AMC
The VadaTech AMC352 is a multichannel AdvancedMC video decoder with four HDMI/DVI outputs. It supports H.264, VC-1, MPEG-4, VP8 and other compressed formats up to Full HD 1920 × 1080 at 60 FPS. Video data is delivered to the decoder through PCIe or Gigabit Ethernet for display output.
AMC225 – 10GbE Media Converter & Network TAP
The VadaTech AMC225 is an AdvancedMC 10GbE Ethernet media converter and Network TAP module. It combines two front-panel SFP+ interfaces with a XAUI backplane link. A high-speed signal matrix enables direct interconnection between two ports and ingress traffic mirroring to a third port at the Ethernet physical layer.
AMC705 – 16-Core Arm 100GbE Processor AMC
The VadaTech AMC705 is a high-performance AdvancedMC processor module based on the NXP Layerscape LX2160A. It combines 16 Arm Cortex-A72 cores, 16 GB ECC DDR4, QSFP28 connectivity up to 100GbE and configurable PCIe/SRIO interfaces for embedded computing and network processing in MicroTCA platforms.